COMP Cams 4-Pattern 253/263 IB, 255/265 OB Hydraulic Roller Cam for Chevrolet Small Block

Retro-Fit (Link Bar) Hydraulic Roller Lifters

Fits '58-'02 262-400 c.i.d. Chevy Small Blocks. Recommended in larger c.i.d. and high compression Applications 3500+ Stall. Upgraded valve train components and aftermarket cylinder heads required. WARNING: Camshaft Optimized for use with a Melanized or Nitrided distributor Gear. Not compatible with cast or Steel Gears without similar surface treatments. Failure to utilize the proper distributor Gear will void all warranties and/or return policies. 4-Pattern Optimize Valve Events Based on Runner Length Increases Area Under the Curve and High RPM Stability. To make the most power from your engine, you need to optimize the air ingested and captured by avoiding valves closing too soon or too late. Any conventional center layout single throttle body or carbureted V8 intake manifold features longer outboard runners and shorter inboard runners, meaning that each valve event should occur at a different moment. COMP Cams 4-Pattern Camshafts are the very first Series of cams designed to accommodate this difference in length and avoid valves closing at the wrong times. NASCAR teams have been using Camshafts designed this way for years, and using lessons learned along with them, COMP Cams has designed a Series of cams that optimizes valve events and features a large increase in both area under the curve and stability at high RPM.

The Camshafts feature four different lobe patterns with one intake and exhaust design for outboard runners, and another intake and exhaust design for the inboard runners. While the four inboard cylinders are all the same grinds, the outboard exhaust openings are two degrees earlier, with outboard intake closings coming two degrees later. This is the first ever use of Technology in street vehicles to balance air/fuel ratio per cylinder and can net you a possible 1000+ RPM over other hydraulic Rollers and anywhere from 5-20+ horsepower peak to peak, depending on cylinder head flow. The 4-Pattern hydraulic Roller cams are CNC-Machined from Steel billet cores with cast iron distributor drive Gears. The cams also feature a tight lobe separation for both excellent performance and a throaty sound. 1: Cams for '55-'57 engines can be custom ordered. 2: The '87+ Chevy Small Block received provisions for Roller lifters. Most '87 - '93 GM cars came with Roller lifters, but most '87 - '95 trucks came with flat tappet lifters in Roller lifter style blocks. If your block has '87+ OEM-style Roller Cam provisions but does not have Roller components fitted, COMP Hydraulic Roller Lifter Install Kit for '91-'02 Blocks can be purchased. As well as a '87+ OE-Style COMP Hydraulic Roller Cam.